New slim and stylish MSR for R15
We would like to introduce you to the new slim and stylish MSR module that was specifically designed around the R Series Android POS terminals. The new MSR module has a smaller footprint than its predecessor and compliments the R Series very well.
The new MSR will go into full production at the end of May 2019 and should you have any query or would like to start your pre-book of the new MSR, you are welcome to discuss with your sales representative.
Here are some images of the new MSR as well as some of the basic specifications.
SPECIFICATIONS:
Reference Standards:
ANSI/ISO Standards 7810,7811-1/6, 7813
Reference Standards:
Two-frequency coherent phase (F2F)
Decoding Method:
ISO: Track1 - IATA Track2 - ABA Track3 – THRIFT
Card Swiping Direction:
Bi-directional
Lift:
Electronics: 125,000 hours. • Head: 1,000,000 passes
Environment:
Operating Temp: 0 ~ + 55∘C • Storage Temp: -10 ~ + 55∘C • Humidity: 10 ~ 90 relative
Interface:
USB (HID -Keyboard Mode)
Compatible with USB specification:
Revision 1.1
Compatible with HID specification:
Version 1.1
“MagStripe Card Reader Configuration Utility” Support
Microsoft Windows98/ME/2000/XP/Vista 32bit.
OPOS Driver: for Win32-based POS device access. OPOS is currently deployed on Microsoft Windows 2000/XP/Vista/ Win7 32bit.
Power Supply:
DC 5V, though USB Interface Cable.
Power Consumption:
less than 8.5mA maximum total current when no card is being swiped, less than 10 mA maximum total current at 5V while card is being swiped.
Card Swiping Speed:
Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s)
The new MSR will go into full production at the end of May 2019 and should you have any query or would like to start your pre-book of the new MSR, you are welcome to discuss with your sales representative.
Here are some images of the new MSR as well as some of the basic specifications.
SPECIFICATIONS:
Reference Standards:
ANSI/ISO Standards 7810,7811-1/6, 7813
Reference Standards:
Two-frequency coherent phase (F2F)
Decoding Method:
ISO: Track1 - IATA Track2 - ABA Track3 – THRIFT
Card Swiping Direction:
Bi-directional
Lift:
Electronics: 125,000 hours. • Head: 1,000,000 passes
Environment:
Operating Temp: 0 ~ + 55∘C • Storage Temp: -10 ~ + 55∘C • Humidity: 10 ~ 90 relative
Interface:
USB (HID -Keyboard Mode)
Compatible with USB specification:
Revision 1.1
Compatible with HID specification:
Version 1.1
“MagStripe Card Reader Configuration Utility” Support
Microsoft Windows98/ME/2000/XP/Vista 32bit.
OPOS Driver: for Win32-based POS device access. OPOS is currently deployed on Microsoft Windows 2000/XP/Vista/ Win7 32bit.
Power Supply:
DC 5V, though USB Interface Cable.
Power Consumption:
less than 8.5mA maximum total current when no card is being swiped, less than 10 mA maximum total current at 5V while card is being swiped.
Card Swiping Speed:
Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s)