News

New slim and stylish MSR FOR R Series

We would like to introduce you to the new slim and stylish MSR module that was specifically designed around the R Series Android POS terminals. The new MSR module has a smaller footprint than its predecessor and compliments the R Series very well. As an optional to the MSR we can also add a Biometric Reader (Fingerprint Reader) on the side of the MSR. With the Low profile design the Biometric Reader is well seated and does not protrude on the side of the MSR.

 

The new MSR will go into full production at the end of May 2019 and should you have any query or would like to start your pre-order of the new MSR, you are welcome to discuss with your sales representative.

 

Here are some images of the new MSR and Fingerprint Module as well as some of the basic specifications.

SPECIFICATIONS:

Reference Standards:

ANSI/ISO Standards 7810,7811-1/6, 7813

Reference Standards:

Two-frequency coherent phase (F2F)

Decoding Method:

ISO: Track1 - IATA Track2 - ABA Track3 – THRIFT

Card Swiping Direction:

Bi-directional

Lift:

Electronics: 125,000 hours. • Head: 1,000,000 passes

Environment:

Operating Temp: 0 ~ + 55C • Storage Temp: -10 ~ + 55C • Humidity: 10 ~ 90 relative

Interface:

USB (HID -Keyboard Mode)

Compatible with USB specification:

Revision 1.1

Compatible with HID specification:

Version 1.1

“MagStripe Card Reader Configuration Utility” Support

Microsoft Windows98/ME/2000/XP/Vista 32bit.
 

OPOS Driver: for Win32-based POS device access. OPOS is currently deployed on Microsoft Windows 2000/XP/Vista/ Win7 32bit.

Power Supply:

DC 5V, though USB Interface Cable.

Power Consumption:

less than 8.5mA maximum total current when no card is being swiped, less than 10 mA maximum total current at 5V while card is being swiped.

Card Swiping Speed: 

Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s)

Fingerprint Module:

Electrical parameters  
Supply voltage 5V  or  3.3V
Touch current 8uA  (The average voltage is 5V)
Module working current 31mA(The average voltage is 5V)
Fingerprint image entry time <0.45s
Working temperature -35℃-+80℃
Storage temperature -35℃-+80℃
Working humidity 20%—90%
Storage humidity 16%—95%
Performance parameter  
Fingerprint collector NEL100 Semiconductor sensor
Acquisition window size 20.4MM*33.4MM
Effective image size 12MM*15MM
Image size 192*192pixel(Effective 192*192pixel)
Image pixel 508DPI
Matching mode Comparison mode(1:1)  
Search mode1NAt the time of full registration of 500 pieces< 1s
Whether there is self-learning Yes
Fingerprint characteristics 498 bytes (Extraction time < 0.45s)
Collection mode Planar pressing of Capacitance Array Semiconductor Sensor
Storage capacity 500 PCS
Safety level Level 5 (from low to high: 1, 2, 3, 4, 5)
False recognition rate (FAR) <0.001% Security Level3
Rejection rate (FRR) <0.1 %Security Level3
Search time <1.0s    (Mean value)
Communication interface UART(TTL logic level)Or USB1.1/2.0 compatibility.
Communication baud rate(UART) Parity = NONE, Stop Bit = 1, Baud rate can support:9600192003840057600115200230400460800921600Default115200
 

 

QQ